Free Digital Forms for
Every Inspection Standard

The US standard for inspecting highway guardrail systems per AASHTO MASH crash-testing criteria, rating rail corrosion, wood post damage levels, and end terminal condition on a 1-to-4 overall scale.

The U.S. federal standard for physical accessibility in public accommodations and government facilities, with binary compliance determinations.

The Australian standard for operational inspection of playground equipment, surfacing compliance, and site safety with a 1–5 condition rating.

The standard practice for Pavement Condition Index (PCI) surveys of parking lots, recording AC and PCC distress types, severity levels, and quantities to produce a 0–100 PCI score.

The standard methodology for calculating the Pavement Condition Index on road networks using a Branch–Section–Sample Unit hierarchy and 38 distress types.

The US standard for commercial real estate property condition assessments, rating building systems as Good, Fair, or Poor with structured deficiency reporting and the $3,000 de minimis cost threshold.

The U.S. standard for public playground equipment safety, defining use zone clearances, entrapment openings, protrusion limits, protective surfacing requirements, and a four-level NRPA hazard priority rating.

The UK Active Travel England assessment tool for evaluating cycling and walking infrastructure quality across Policy, Safety, Path, and Placemaking modules.

The German federal standard for mapping and valuing biotopes under the BKompV compensation regulation, classifying ~668 biotope types and scoring them on a 0-to-24 Biotopwert scale.

The German guild directive for gravestone stability inspection using a two-stage process — visual assessment and 300 N force test — producing a four-grade stability rating (I–IV) under Verkehrssicherungspflicht.

BS 5837:2012 is the British Standard for pre-development tree surveys in the UK planning system. It classifies trees into retention categories A, B, C, or U using the Cascade Chart and calculates Root Protection Areas from stem diameter to define construction exclusion zones.

The UK wiring regulations standard for electrical installation condition reports (EICR) covering lighting systems, with C1/C2/C3/FI observation classification codes.

The Dutch standard for visual tree safety inspection based on VTA methodology, classifying trees into three safety categories — No Defects, Attention Tree, and Risk Tree — under Zorgplicht duty of care.

The Carlson Trophic State Index (TSI) is the global standard for classifying the biological productivity of lakes and reservoirs using three parameters — Secchi disk transparency, chlorophyll-a, and total phosphorus — to produce a score from 0 to 100.

The US Cemetery Conservators United Standards for preservation assessment of monuments and headstones, using a six-criterion 1-to-10 method evaluation and six conservation categories.

The UK framework for maintaining Sustainable Drainage Systems through structured performance inspection with a three-tier maintenance hierarchy and A-to-E condition rating.

The primary U.S. federal guideline for playground hazard identification, covering protective surfacing, the Dirty Dozen hazard categories, and a five-level Hazard Priority Rating (1–5).

The Dutch CROW standard for visual quality assessment of public spaces using reference images (Beeldmeetlat) and an A+ to D quality scale across categories including litter, weeds, surface damage, and vegetation.

The UK DMRB standard for inspecting highway structures — bridges, culverts, retaining walls, and gantries — using Severity (1–5) and Extent (A–E) defect rating to produce a Bridge Condition Indicator (BCI) from 0 to 100.

The Canadian national standard for children's playground equipment and surfacing safety, with a 1-to-5 equipment condition scale and A/B/C hazard priority classification.

The German standard for structural inspection of bridges using the RI-EBW-PRÜF three-axis S-V-D damage rating and a 1.0–4.0 Condition Grade.

The German standard for structural inspection of retaining walls using the RI-EBW-PRÜF three-axis S-V-D damage rating and a 1.0–4.0 Condition Grade.

The German standard for barrier-free construction compliance, defining dimensional thresholds, surface requirements, and sensory criteria with a Compliant / Conditionally Compliant / Non-Compliant per-element status.

The German standard for tactile ground surface indicators for visually impaired persons, covering profile geometry verification, luminance contrast measurement, and a 1-to-5 condition grade scale.

The German standard for bicycle parking facility safety and quality, covering system classification, spacing geometry, safety checks, and three-level DIN compliance assessment.

The German standard for planning, construction, and operation of stormwater infiltration facilities, covering soil permeability assessment, system sizing, and pre-treatment requirements.

The European safety standard for playground equipment inspection covering structural integrity, entrapment testing, and impact-absorbing surfacing with three inspection tiers: routine visual, operational, and annual.

The European standard for road vehicle restraint systems, classifying barriers by containment level (N1–H4b), working width (W1–W8), and impact severity (ASI A–C), with a 1-to-5 field condition rating.

The European standard for coding visual observations during CCTV inspection of drains and sewers, using a structured main code, characterisation, and quantification syntax.

The European standard for multi-use games area (MUGA) safety, covering inspection types, surfacing, fencing, entrapment testing, and a likelihood-by-severity risk assessment matrix.

The European safety standard for permanently installed outdoor fitness equipment, defining a three-tier inspection regime with routine, operational, and annual assessments plus a 1–5 condition scale.

EPA NPDES BMP inspections are required under the US Clean Water Act for Municipal Separate Storm Sewer Systems (MS4s). Inspectors evaluate structural stormwater controls using a Pass / Pass (Needs Maintenance) / Fail rating to determine regulatory compliance.

The German FGSV standard for cycling infrastructure assessment using the HEBRA loss-point methodology, producing Quality Levels A through F for facility geometry, surface condition, and safety.

FGSV E EMI 2012 is the German guideline for visual condition assessment of municipal roads. Inspectors record distress type, severity, and extent within defined segments to produce a Zustandsnote from 1.0 (Very Good) to 5.0 (Inadequate).

The US Federal Highway Administration standard for bicycle-specific road safety audits, evaluating road design, intersections, and cyclist-perspective hazards using five prompt list categories.

The U.S. federal standard for bridge safety inspection with a dual-tier system: 0-to-9 component condition ratings and CS1–CS4 element-level structural assessment.

The U.S. federal framework for element-level tunnel inspection, distributing each element's quantity across four Condition States (CS1 Good through CS4 Severe) for quantitative, comparable data.

The UK Flower-Insect Timed Count citizen science protocol for monitoring pollinator abundance, using a standardized 10-minute observation of 11 insect classification groups on target flowers.

The German FLL standard for landscape maintenance classification, defining five care intensity levels (PK 1–5) with element-level condition rating and Soll-Ist target-actual comparison methodology.

The German regulation for visual tree inspection verifying traffic safety, using Roloff vitality stages (0–3), a three-tier damage level, and an interval matrix for re-inspection scheduling.

The ICCM Management of Memorials standard is the UK operational framework for assessing memorial stability in burial grounds. It uses a two-stage process of visual triage and 25 kg hand test to classify memorials into Priority 1 (Red), Priority 2 (Amber), or Priority 3 (Green).

IEC 61851 is the international standard for electric vehicle conductive charging systems. It defines safety verification procedures for Mode 3 AC charging stations including electrical tests, Control Pilot protocol validation, and RCD protection checks.

The UK standard for structural inspection of street lighting columns, sign poles, and CCTV masts using Severity (1–5) and Extent (A–E) defect grading to produce the Column Condition Index (CCI).

The Australasian practice note for condition assessment of park and recreation assets using the IIMM 1-to-5 condition grading scale, defect and failure mode classification, and remaining useful life estimation.

The internationally recognized methodology for tree risk evaluation based on ANSI A300 Part 9, using a dual-matrix system combining failure likelihood, impact likelihood, and consequences into a four-level risk rating.

The international standard for tactile walking surface indicators (TWSI), covering dimensional compliance, luminance contrast verification, and a 1-to-5 condition rating scale.

The JNCC Phase 1 Habitat Survey is the UK standard methodology for classifying and mapping wildlife habitats at a landscape scale. It uses alphanumeric codes across ten broad habitat categories and records plant species abundance using the DAFOR scale.

The UK Department for Transport standard for assessing cycling infrastructure quality using 25 indicators across five design principles, producing a Red/Amber/Green traffic-light score with Critical Fail overrides.

The foundational 12-point summation system for tree failure risk assessment, combining Failure Potential, Size of Part, and Target Rating into a single Hazard Rating (3–12).

The U.S. FHWA standard for maintaining minimum sign retroreflectivity per MUTCD Section 2A.08, using five approved assessment methods and Table 2A-3 thresholds by sign color and sheeting type.

The NASSCO Lateral Assessment Certification Program for CCTV inspection of sewer lateral connections, using structural and O&M observation codes with a 1-to-5 condition grade scale.

The North American standard for systematic manhole condition assessment with a two-tier inspection protocol and 1–5 condition grading.

The North American standard for CCTV-based sewer pipe defect coding with a four-family observation code system and 1–5 condition grading.

The US National Cooperative Highway Research Program standard for highway retaining wall inspection, with a 1-to-5 O&M condition rating, dual safety/mobility consequence scoring, and GAM planner integration.

The Dutch standard for objective condition measurement of building and installation components using a standardized 1-to-6 rating scale and weighted scoring algorithm.

The Dutch methodology for condition assessment of infrastructure and civil engineering structures — bridges, tunnels, quay walls, locks — using a 1-to-6 condition score with defect classification by severity, intensity, and extent.

The Dutch standard for objective condition assessment of street furniture — benches, bollards, bins, shelters, signage — using the NEN 2767 defect matrix with a 1-to-6 rating scale.

New York City Local Law 126 Parking Inspection Program Standard for the periodic safety inspection of parking structures, with SAFE/SREM/UNSAFE classification and the mandatory 10% physical examination rule.

The New Zealand Pipe Inspection Manual for CCTV assessment of sewer and stormwater pipes, using distance-based observation logging with 13 defect code categories and a 1-to-5 condition grade scale.

PWTAG Technical Note 67 is the UK guidance for managing water quality and Legionella risk in decorative water features. It mandates chlorine levels of 3–5 mg/L, pH 7.0–7.4, monthly bacteriological testing, and BS 8580-aligned risk assessments.

A probabilistic tree risk methodology calculating Risk of Harm by multiplying target value, impact potential, and probability of failure, classified into a four-level traffic-light tolerability framework.

The German procedural guideline for bridge inspection under DIN 1076, defining the per-defect Einzelschaden data capture loop, the S-V-D 0–4 rating workflow, extent classification, and measure/urgency assignment.

The German procedural guideline for retaining wall inspection under DIN 1076, covering 11 ASB-ING wall types, per-defect S-V-D 0–4 rating, extent classification, and EP-Kennzeichnung recheck tracking.

The San Francisco Proposition C park maintenance standards using binary Met/Not Met compliance across 14 park features and a 91% citywide target score.

The FHWA Long-Term Pavement Performance distress survey protocol with 15 distress types across five categories, three severity levels, and SI-unit quantification for research-grade pavement condition data.

The UK Ministry of Justice guidance for burial ground memorial stability testing using a two-stage process — visual survey and 25 kg hand test — with a three-tier risk classification (Category 1–3).

The UK standard for rapid, vehicle-based road condition surveys recording carriageway and footway defects by type, chainage, and lateral extent to generate network-level condition indices.

The U.S. Army Corps of Engineers standard for evaluating levee systems under PL 84-99, using an Acceptable / Minimally Acceptable / Unacceptable rating that determines federal rehabilitation eligibility.

VDI 6200 is the German guideline for regular structural safety inspections of buildings. It classifies structures by Damage Consequence Class (CC 1–3) and Robustness Class (RC 1–4), rating defects on three axes — Stability (S), Traffic Safety (V), and Durability (D) — producing a Zustandsnote from 1.0 to 4.0.

Biomechanical tree inspection method by Prof. Dr. Claus Mattheck using the body language of trees and t/R wall-thickness rule to assess structural safety.

WRc MSCC5 is the UK and Irish standard for coding sewer and drain defects during CCTV inspection. Aligned with BS EN 13508-2, it translates visual observations into alphanumeric codes that feed into the SRM grading system, producing separate structural and service condition grades from 1 to 5.